| Hoist and Wench | |
 |
In most marine applications, a hydraulic system must offer low noise, precision control, and low energy cost benefits. With the hoist and wench shown, HyPneu will simulate and optimize all these parameters. When the design and specification would change without notice or obligation, the designer must have results quick. HyPneu will allow you to increase reliability where needed, especially in heavy loaded applications, such as the marine industry. Large or small motors can be replicated by one click, or two pages comparing the small and large in one simulation. Even header and branch systems can be simulated with easy adjustments. |
Hydraulic Steering System |
|
In marine applications, boats are typically equipped with a hydraulic steering system. These systems are proportional to the number of turns the wheel can steer. This ratio can be determined by the cylinder, pump, and rudders. With different cylinders, the turns can decrease, and increase response. Using HyPneu in this application will ensure the timing and adjustments are correct, to reduce system testing. |
 |
| Bilge Pump | |
 |
Hydraulic bilge pump systems typically have no need for wear plates, seals, electrical parts, and are typically designed for low maintenance. Hydraulic bilges can be designed to handle dry situations due to hydraulic power, and will not suffer from cavitation. With hydraulic power being used, the pumps can be small and have multiple speeds. Also, being around water, electrical circuits become harm and therefore using hydraulics creates no electrical hazard. Designing or maintaining the system with HyPneu will reduce pump down time and significantly reduce cost. |
 |